Making a Vintage Quilt upholstered headboard is an easy weekend project you can make to completely transform an ordinary bedroom into a shabby chic get away.
Use your favorite Vintage Quilt to make this simple upholstered headboard. If you like to collect Vintage Quilts then you should have an awesome headboard.
You can complete this Vintage Quilt project in one day, for less than $100. The cost will depend on how pricey your Vintage Quilt is. To save money making your headboard I recommend using a your own Vintage Quilts to cover the headboard. You could also buy a new quilt that looks old.
To Make an Upholstered Vintage Quilt Head Board You Will Need:
MDF (3, 6, or 9 Pieces, sizes described below)
Flat L brackets
The first step is to cut your MDF to size. I recommend letting the professionals at the home improvement store make these cuts for you. They only charge 25 cents a cut!
My measurements are merely recommendations for a Vintage Quilt bed headboard. You can easily change the dimensions of this headboard for a twin, full, or king-sized bed based on the size of your bed.
Cut three separate pieces of MDF to these specific measurements:
Measure how wide your bed is.
Now, have the MDF cut to the largest square possible to match the width of your bed. You can always make it larger if your want though! The look is in threes, so three across and three squares up is what we are going for.
You need at least thee of these, but you can make it as wide or as tall as you want.
Now, cut a piece of foam to fit each of the three or more pieces of MDF exactly. You can buy sheets of foam at any fabric store. To save time you can as them to cut it. You can also easily cut it at home using an electric knife.
Lay your pieces of MDF outside on a flat work surface. Spray each piece lightly with a strong adhesive spray. Lay the corresponding foam piece on the MDF and press it into place. The spray adhesive with hold it in place so it does not ever move.
Now, cut your vintage quilt out to squares that are about three inches wider and taller than your MDF squares.
Lay the Vintage Quilt square face down on a clean flat work surface. You want the pattern you want to see laying down on the table.
Lay the corresponding piece of MDF and foam down on the back of the Vintage Quilt Square. The foam should be touching the back of the Vintage Quilt square. Start in the middle of each side. Pull the Vintage Quilt up and over the back of the MDF. Use a staple gun to attach it in place. If you are worried about damaging the Vintage Quilt you can use upholstery tacks.
Do the middle of each of the four sides first. Pull the Vintage Quilt in taunt each time. Evenly work your way out from the center staples. Do the four corners last? To make them neat practice folding them over like you is wrapping a package. Once you have the right look staple the corner fabric into place.
Repeat this process on all of the pieces of the Vintage Quilt headboard.
Now, once all of your Vintage Quilt pieces are covered you need to lay them face down on a clean work surface. Place three in a row or however many you need to be as wide as your specific bed. Line the squares up at the bottom of the headboard. This line should be straight, causing a straight line at the top of the Vintage Quilt headboard.
Use a metal flat bracket to attach each piece of the Vintage Quilt headboard together. Place one at the top and one at the bottom of every piece of the headboard. The left hole of the bracket should be on the left piece and the right hole of the bracket should be on the right piece. You can find these flat brackets where the L brackets are in the hardware store. Make a mark where each hole falls with a pencil. Pre drill the hole about ½ inch in. Lay the brackets back in place and screw them into place.
Screw in picture hanging hooks onto the left and right sides of the back of the upholstered Vintage Quilt headboard. If you are making this exceptionally large, bigger than the recommended dimensions here, use heavy weight picture hanging hooks. The hooks should be installed about four inches in from the left and right side of the headboard. They should be about 2 inches down from the top of this piece.
Install you screws into the wall and hang your upholstered Vintage Quilt headboard.
Make sure your screws are firmly attached into the wall. You can drill them into the studs for best results, which may cause you to place your picture hanging hooks on the back of the headboard based on these measurements. You could also install toggle bolts into drywall if no studs are located where you need them.
Tip: Have all of your Vintage Quilt facing the same direction.
MDF, also known as Medium Density Fiberboard, is available at any home improvement store. It is an inexpensive alternative to using a sheet of pine board for this project. It does weigh more than wood though, so if you are concerned about how heavy the headboard will be feel free to substitute pine board for the MDF in this project.